Need ostomy help now? Call for product selection, fitting and fast support.☎ +961 76 62 62 26☎ +961 71 36 12 03WhatsApp for Fast Help
HollisterReference 34200DI

Hollister Convex Skin Barrier in Lebanon — Conform 2, 55 mm

A barrier with a curved inner surface that presses gently into the skin around the stoma, encouraging a flush or retracted stoma to sit slightly forward so output goes into the pouch instead of under the wafer.

55 mm
  • For stomas that sit flush with or below the skin
  • 55 mm flange, cut-to-fit opening
  • Usually worn with an ostomy belt
PRODUCT DETAIL

Features and patient benefits

Features

  • Convex FlexWear barrier with a shaped inner surface
  • Cut-to-fit opening
  • Conform 2 coupling, 55 mm
  • Belt tabs for use with the Hollister ostomy belt

Patient benefits

  • Can resolve repeated leaking that a flat barrier and a ring together cannot
  • Helps output clear the skin and enter the pouch
  • Often extends wear time considerably where a flat barrier was failing in hours
  • Combined with a belt, gives a noticeably more secure feel
SPECIFICATIONS

Sizes, references and compatibility

BrandHollister
SystemTwo-piece — Hollister Conform 2
Available sizes55 mm
Reference34200DI
ReferenceHollister 34200DI
ProfileConvex
Flange55 mm
OpeningCut-to-fit
Recommended withHollister ostomy belt 7299

Two-piece systems only fit when the flange size on the pouch matches the flange size on the skin barrier. Hollister Conform 2 uses 45, 55 and 70 mm; HDL-Hendry uses 50, 60 and 70 mm. The two ranges are not interchangeable.

PRACTICAL GUIDANCE

How this product is used

Convexity is a solution to a specific problem, not an upgrade. It is indicated when the stoma is flush with the skin or retracted, when the skin around it dips inward, or when a flat barrier plus a ring is still leaking. If a flat barrier is working, there is no reason to change.

Because convexity works by applying pressure, fit matters more than usual, and it is normally used together with a belt so the pressure stays even. It is not suitable for every stoma — a newly formed or protruding stoma, or fragile peristomal skin, can be made worse by pressure. This is one to discuss with your stoma nurse or surgeon before switching.

We stock the 55 mm convex barrier. If your flange is 45 or 70 mm, tell us and we will confirm what is available before you order.

COMPLETE THE SYSTEM

Often ordered together

PATIENT QUESTIONS

Frequently asked questions

When is a convex barrier the right choice?

Typically when the stoma is flush or retracted, when the skin around it dips, or when a flat barrier with a barrier ring is still leaking. It is a targeted solution rather than a general upgrade.

Do I need a belt with a convex barrier?

It is commonly used with one, because the belt keeps the pressure even around the stoma. Many patients find the combination is what actually stops the leaking.

Is convexity safe for every stoma?

No. Pressure around a newly formed stoma, a protruding stoma or fragile skin can cause problems. Convexity should be discussed with your stoma care nurse or surgeon before you switch.

ORDER FROM STOMACARE LEBANON

Where to buy this product in Lebanon

Order directly from StomaCare Lebanon by WhatsApp or phone. We deliver across Lebanon and can coordinate shipping outside Lebanon.

If you are not sure of the reference or the flange size, send a photo of your current box on WhatsApp and we will identify it for you.

Fanar, Main Road, Kikano Building, Ground Floor, Lebanon  ·  info@stomacarelb.com